Salter Oxygen Tubing Connector

How to use Salter Tubing Connector?

	Wash hands. Open package and remove Tubing Connector.
	Hold the middle of the Tubing Connector and align the supply tubing end connector.
	Insert, push, and twist the tapered end of the Tubing Connector into oxygen tubing end connector.
	Repeat step 3 to attach the other side of the connector to the nasal cannula or oxygen mask tubing Gently tug on connection to check for a secure fit.
	To remove Swivel Connector, hold the center of the Tubing Connector, twist and pull on the tubing end connector.

Precautions to take While using Oxygen Tubing Connector

• Use oxygen as prescribed by your doctor.
• Oxygen is a nonflammable gas, but does support combustion. Follow your homecare provider’s instructions for the care and safe operation of your oxygen delivery system
• Do not use flammable products such as aerosol sprays, cleaning products near your oxygen.
• Keep an extra Swivel Connector and other oxygen supplies available for backup.
• Do not smoke or allow anyone to smoke around you when oxygen is used
• The length of the oxygen tubing plus nasal cannula should not exceed 57 feet to ensure enough pressure to deliver your set oxygen flowrate
• Do not kink, bend or tie your oxygen tubing.
• Keep excess tubing loosely coiled and out of the way to prevent tripping on oxygen tubing
• Keep oxygen equipment at least 6 feet away from flames or any heat source.
• Swallowing hazard, do not let children or pets play with your oxygen equipment.

Customer Reviews