Salter Labs Nebulizer With Thread Grip

Features of Salter Labs Nebulizer

• Pneumatically powered nebulizer used to deliver aerosolized medication via an aerosol mask
• This handheld nebulizer has larger surface area provided by unique convex cone design
• Patient population includes infant pediatric and adult patients
• This nebulizer has removable green convex cone
• Disposable single-patient multiple-use nebulizer system
• Scalloped, bottom cuff design
• One eighth turn screw-on cap
• Anti drool

How to Assemble Salter Labs Nebulizer?

1. Ensure green cone is seated on the bottom of the medication cup
2. Screw the cap onto the medication cup
3. Insert the top of the nebulizer cap into the mask connector
4. Connect the gas supply tubing to the bottom of the medication cup

How to start the Nebulizer Treatment using Salter Labs Nebulizer?

1. If possible, position the patient in an upright or sitting position.
2. Remove the mask from the nebulizer cap.
3. Add the prescribed medication.
4. Set the flow rate between 5 LPM and 8 LPM (≥ 10 PSI).
5. Keep the nebulizer in an upright position and instruct the patient to take slow, deep breaths.
6. Occasionally tap the side of the nebulizer to help the solution drop to the bottom of the cup for nebulization.
7. Continue the treatment until the onset of inconsistent nebulization, i.e. sputtering.
8. Turn off the gas flow. Shake out any residual medication.
9. Clean and store the nebulizer per your department’s aerosol protocol.

How to Clean Salter Labs Disposable Nebulizer?

1. After each treatment, rinse the inside of the nebulizer with sterile water or normal saline.
2. Shake out the excess fluid.
3. Air dry or hand dry the nebulizer with a lint-free cloth.
4. Store the nebulizer in a clean equipment bag.
5. Discard and replace the nebulizer after 7 days of use.

Instruction Manuals for Salter Labs Thread Grip Nrebulizer

• User Manual for Salter Labs Jet Nebulizer
• Cleaning Instructions for Salter Labs HandHeld Nebulizer