Respironics FitLife Total Full Face CPAP Mask With Headgear

What to buy with Respironics Total Full Face Mask

• 3B Medical CPAP Travel Wipes
• Crane HEPA Air Purifier with 3 Speed Settings
• 3B Medical Lumin CPAP Mask And Accessory Cleaner

How to Use CPAP Mask with Headgear?

Before Use

• Read and understand the instructions completely.
• Hand wash the mask.
• Wash your face.
• Inspect the mask components for damage or wear, replace if necessary.
• Verify that the entrainment valve functions correctly

How to wear the Respironics CPAP Full Face Mask?

1. Loosen the side headgear straps by peeling back the tabs and open the straps to a larger size.
2. Disconnect one or both of the bottom headgear clips. Grasp the clip with the thumb and index finger and in a turning motion, lift the clip upwards with the thumb while pulling the clip away from the mask faceplate.
3. Hold the mask against your face. The top of the cushion will contact your face just above the eyebrows. The bottom of the cushion will contact your face just above the chin. Be sure your mouth remains slightly open.
4. Pull the headgear over your head.
5. Attach one or both bottom headgear clips by finding the tab on the lower part of the mask faceplate with your thumb. Guide and gently push the headgear clip onto the tab with your middle and index fingers until it clicks into place.

Achieving the Right Fit

1. Tighten the side headgear straps. The top strap should lie at the crown of the head. The cross-strap should sit low on the back of the head.
2. Tighten the bottom headgear straps.
3. Adjust the top headgear strap, if necessary. If the side headgear straps are resting on your ears, adjust the top headgear strap to lift the straps slightly off of your ears. DO NOT over tighten as it may cause the headgear to slip.
4. Connect the accessory swivel to the mask elbow.
5. Connect the tubing that is included with your CPAP or bi-level device to the accessory swivel.
6. With the airflow on, lie down and breathe normally with your mouth slightly open. Reseat the mask by pulling it directly away from your face and gently setting it back into place.
7. Assume different sleeping positions and move your head around.
8. If there are any air leaks, make any final adjustments. Some air leakage is normal

Respironics FitLife CPAP Mask with Headgear User Manual

How to Wash FitLife Total Face CPAP Mask?

Hand wash the mask before first use and daily. The headgear should be hand washed weekly, or as needed. The headgear does not need to be removed for daily cleaning of the mask.

1. Hand wash mask in warm water with a mild liquid dishwashing detergent.
2. Caution: Do not use bleach, alcohol, cleaning solutions containing bleach or alcohol, or cleaning solutions containing conditioners or moisturizers.
   Caution: Any deviation from these instructions may impact the performance of the product.
3. Rinse thoroughly. Air dry completely before use. Make sure the mask is dry before use. Lay the headgear flat or line dry. Do not place the headgear into the dryer.
4. Caution: Inspect the mask for damage or wear (cracking, crazing, tears, etc). Discard and replace any components as necessary.

Sizing Instructions for Respironics CPAP Mask

To select the appropriate size mask, the mask cushion should surround the patient’s face without obstructing sight and enclose the mouth.

• A—The top of the cushion should rest comfortably against the middle of the forehead above the eye brows.
• B—The bottom of the cushion should rest comfortably under the mouth and above the chin.

For more information please checkout FitLife Total CPAP Mask Sizing Guide

 

Respironics CPAP Full Face Mask Warranty

90 Days Warranty

Customer Reviews