Bemis Hi-Flow Rigid Suction Canister Kit

More Information

• Directions for Use:
  - Gently shake lid to verify shut-off mechanism moves freely.
  - Place lid on canister and press firmly around entire perimeter.
  - Take right angle connectors (elbows) out of bags found in lid packages and apply tightly to patient and vacuum ports.
  Note: On Hi-Flow models only, the patient tube can be placed directly on patient port without an elbow if desired.
  - Apply pour spout cap firmly over pour spout and apply tandem port cap tightly over tandem port if not being used.
  - Attach patient tube to patient port and vacuum tube to vacuum port. Be sure tubing fits snugly.
  - Check all caps and connections for proper seal. Test the assembly for vacuum leaks by turning on vacuum source and occluding the patient tubing with finger or thumb.
  - To eliminate fluid contamination in vacuum line, make sure vacuum line is attached to vacuum port.
• Disposal:
  - Turn off vacuum source and disconnect all tubing.
  - Seal vacuum and patient ports with attached port caps.
  - Remove canister from bracket and transport to disposal area. Do not lift canister by lid. The weight of the contents may cause the lid to separate from the canister.
  - Dispose of according to hospital policy.

Customer Reviews