Drive Medel JetNeb Plus Reusable Nebulizer

More Information

• Instructions or use:
  - The device must be checked before each use
  - Before using the device, proceed with the cleaning operations as described in the Cleaning and disinfection instruction section
  - Open the nebulizer by turning counterclockwise the top
  - Make sure that the medicine conduction cone is properly fitted on the air conduction cone inside the nebulizer and pour the prescribed quantity of medicine into the nebulizer
  - Close the nebulizer by turning clockwise the two parts, paying attention that they are thoroughly sealed
  - Connect one end of the air tube to the nebulizer bottom and the other end to the air outlet of device
  - If the user need to use the mouthpiece, insert it directly onto the nebulizer
  - Wash the nebulizer and its accessories as described in the following section.
• Cleaning and disinfection of the accessories:
  Follow carefully the cleaning and disinfection instructions of the accessories as they are very important for the device performances and the therapy success
  - After each treatment: Disassemble the nebulizer by turning counterclockwise the top and remove the medicine conduction cone. Wash the components of the disassembled nebulizer, the mouthpiece and nosepiece by using tap water; dip in boiling water for 5 minutes. Reassemble the nebulizer components and connect it to the air-outlet, switch the device on and let it work for 10-15 minutes. The masks and air tube must be washed with warm water. Do not boil nor autoclave the air tube and masks
  - Sterilization: Use cold disinfecting liquids following the manufacturers instructions
• Replacement of the Nebulizer:
  - The nebulizer must be replaced after a long period of inactivity, in case it shows deformations or cracks, or when the nebulizer nozzle is obstructed by dry medicine, dust, etc. It is recommended to replace the nebulizer after a period between 6 months and 1 year depending on the usage. Use original nebulizers only
• Timestrip Instructions:
  JetNeb includes a Timestrip. Please follow the below instructions for activation. This is a self adhesive timing device which will indicate when it is time to replace the JetNeb:
  - Simply remove the backing and place the self adhering Timestrip onto the smooth service of the nebulizer compressor, or any other common area smooth surface
  - Depress the button to activate the Timestrip
  - After 6 months, the Timestrip will indicate it is time to replace the JetNeb.
• Timestrip Warning:
  - Timestrip does not monitor the condition of the reusable nebulizer but only records the passage of time after Timestrip activation. If activated at the time of first using the reusable nebulizer, it will then serve as a reminder when the reusable nebulizer should be replaced.
• Warnings:
  Read carefully the instructions for use before operation.
  - Use the device only as described in this manual, following the indications of the doctor.
  - Keep this manual for future reference.
  - If the user decide not to use the device any longer, it is recommended to dispose of it according to the current regulations.
  - Use this device only with medicines/accessories prescribed by the doctor.

Specification

Customer Reviews