Battery Power Solutions ResMed 24V Power Converter For Air 10 And S9 Series

Battery Power Solutions ResMed 24V Power Converter For Air 10 And S9 Series

Brand/Manufacturer: BATTERY POWER SOLUTIONS
Hpfy Stores Save
Authorized Retailer Badge
  • FSA Approved

Battery Power Solutions ResMed 24V Power Converter For Air 10 And S9 Series provides a clean, efficient conversion from 12V to 24V direct current allowing the user to power ResMed Air 10 or S9 Series device with the Freedom CPAP Battery. ResMed Air 10 and S9 series PAP devices operate from 24V direct current and the Freedom CPAP Battery operates from 12V direct current; therefore, the use of a 24V power converter is required to power these devices with the battery.

Features

  • Battery Power Solutions ResMed 24V Power Converter For Air 10 And S9 Series includes the converter box and labeled output cords to fit Air 10 and S9 series devices
  • Each cord has a tag to identify if it is compatible with ResMed Air 10 or S9 series devices
  • Designed for use with both ResMed Air 10 and S9 series PAP devices and the Freedom CPAP Battery
  • Compatible with both the Freedom CPAP Battery and the discontinued C-100 CPAP Battery
  • Note:
    - This 24V Power Converter only connects to ResMed Air 10 and S9 series PAP devices and the Freedomâ„¢ CPAP Battery or C-100 CPAP Battery.
    - ResMed DC/DC power converters or a sine wave power inverter may also be used to complete the connection between the Air 10 or S9 series device and the Freedomâ„¢ CPAP Battery or C-100 CPAP Battery. Run times may be lower when using either of these connection options.
  • Also Available (Separately):
    - Battery Power Solutions Freedom CPAP Battery (Battery Only)(Code: BPS FREEDOM)

More Information

  • Important Connections:
    - The connection steps must be followed in exact sequence in order to initiate the voltage conversion process and thus allow the CPAP Battery to power the device. After the connection if you are not receiving power to the device unplug all components and follow the instructions again.
    Single Battery Connection:
    - Plug the 24V power converter box into the DC OUT jack of the battery.
    - Plug the appropriate output cord for your device (Air 10 or S9) into the power converter box.
    - Plug the 24V power converter (with appropriate device output cord attached) into the DC input port of the ResMed Air 10 or S9 device.
    - Turn on the PAP device and it should begin functioning.
    - When not in use disconnect all devices from the battery thus allowing the battery to completely shut down.
    Dual Battery Connection:
    - Plug the DC power pigtail cord included with the CPAP battery kit into the DC OUT jacks of both batteries.
    - Plug the appropriate output cord for your device (Air 10 or S9) into the power converter box.
    - Plug the 24V power converter (with appropriate device output cord attached) into the DC input port of the ResMed Air 10 or S9 device.
    - Turn on the PAP device and it should begin functioning.
    - When not in use disconnect all devices from the battery thus allowing the battery to completely shut down.

Specification

ParticularsSpecifications
Input12V DC
Output24V DC, 3.75(max)
Length60" (Connector to Connector)
Weight4oz

Warranty

1 year warranty for manufacturing and quality defects.

Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*


Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.shopnebulizer.com

Close